Softmod Depot
March 29, 2024, 08:23:29 AM *
Welcome, Guest. Please login or register.
Login with username, password and session length
News: 10.23.09 - The website is fully operational again. Thank you for the patience as we put everything back together. Check out the forums for more information if you are curious.
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Get 25-30mbp/s Transfer rate on PS3-FTP  (Read 63890 times)
Kyla666 (zzk2001)
Administrator
Super Modder
******
Posts: 2367

Kicking ass


View Profile
« on: October 26, 2010, 01:42:16 AM »

OK... I am going to show you how to Change the transfer time of them BIG PS3 games in Half by Boosting the transfer up to 25-30mbp/s


First the things you'll need.

1. Crossover cable (if you don't have one This will show you how to make one)

2. PS3 (DUH!!)

3. a 1000mbps Network card

4. Little to NO understanding of networking

OK... How to make a Crossover cable

it's super easy.... take a cat-5 or any Ethernet cable and Cut 1 end off (Best if you have a Ethernet clapping tool)

follow this Pic on the placement of the Pins


Once your done with that connect to your PC then to the PS3

Now setup the Connection setting on the PC

1. Go to Control Panel>Network connections
(right click on your Local Area Connection and pick properties)

2. Push configure button


3. click on Adv tab then pick Link speed
Set 1000Mbps/Full Duplex


4. Set Ip settings as follow


Done for PC side.

How to set up PS3

1. Go to network setting on PS3 and do a Manual setup On everything

2. On PS3 set 1000BASE-T FULL-Duplex

3. Set Ip settings as
IP- 192.168.1.2
Subnet Mask - 255.255.255.0
Default gateway - 1.2.3.4
DNS - 1.2.3.4

4.  Finish other PS3 net settings as auto (Do not do the Net test)

5. ALL DONE... Load  Blackb0x FTP program, Load your FTP program on PC and connect to 192.168.1.2

« Last Edit: October 26, 2010, 06:24:41 PM by zzk2001 » Logged
realg123
Guest
« Reply #1 on: October 26, 2010, 09:03:13 AM »

I guess you would need a crossover cable and won't be able to use a cat5 cable?
What do you do once you cut one end of cat5 cable?

Do you need 2 cat5 cables? cut one end of each then connect them?
Logged
Kyla666 (zzk2001)
Administrator
Super Modder
******
Posts: 2367

Kicking ass


View Profile
« Reply #2 on: October 26, 2010, 12:16:05 PM »

you take a cat-5 cable "look at it" match the color pins for Side A (they should match)  Now cut off one end and place the wires into a new Head as the picture shows for Side B then clamp down.

If you don't have any heads then cut the cable so you can rewire it by splicing the wires one to the other so that it matches Side B pins.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC