Flashing Your Toshiba / Samsung DVD Drive With Xtreme

[drfweega]

This was taken from here > http://xbox360-spot.com/tutorials.php?subaction=showfull&id=1147925117&archive=&start_from=&ucat=1&

Flashing Your Toshiba / Samsung DVD Drive With Xtreme 

Flashing your drive
Advisable to make a backup of your dvd drive firmware first ("mtkflash r /m orig.bin"). Please make sure you hexedit the Xtreme.bin firmware (not Xtrm0800.bin firmware) to include your dvd drive key from your original firmware (usually at $4000-4200).
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360 Power on Xbox 360 Power on PC Boot with standard dos boot disk with included mtkflash utility.
Run "mtkflash w /m firmwarename.bin" with relevant firmware file (Xtreme.bin for running backups or Xtrm0800.bin for security sector extraction)

Extracting Security Sector
Ensure DVD drive has been flashed with Xtrm0800.bin firmware. Drive can now work under Windows.
Insert original game disk into drive and wait for windows to detect disk change.
Run DVDinfoPro.
Enter the following four custom cdb commands:
AD 00 FF 02 FD FF FE 00 08 00 01 C0
AD 00 FF 02 FD FF FE 00 08 00 03 C0
AD 00 FF 02 FD FF FE 00 08 00 05 C0
AD 00 FF 02 FD FF FE 00 08 00 07 C0
Then save hexadecimal display as bin file as SS.bin

Creating a game backup
Ensure DVD drive has been flashed with Xtrm0800.bin firmware. Drive can now work under Windows.
Extract Isobuilder.rar
Insert original game disk into drive and wait for windows to detect disk change
Run DVDinfoPro
Enter the following custom cdb command to unlock drive: (game data visable)
FF 08 01 01
Run Isobuster
Right click on DVD and select Extract From-To
Click Length and enter number of LBAs as follows:
Xbox 1 Original Number of LBA to read 3431264 decimal
or
Xbox 360 Original Number of LBA to read 3567872 decimal
Select User Data (2048 bytes/block)
Click Start Extraction
Enter filename as game.iso and click Save
Upon read error dialogue box choose fill with blank zeros for sector and select use this selection for all errors
Copy game.iso and ss.bin to the relevent isobuilder directory (Depending on Xbox 360 or Xbox 1 game)
Run build360.bat (Xbox 360 game) or build.bat (xbox 1 game)
Ensure your burner will set the booktype of DVD+R DL to DVDRom
Burn with CloneCd and choose the image.dvd file

This was wrote from Commodor4Eva