How to Make New Xbox HDD without installing Softmod
Kyla666 (zzk2001):
(Updated 9/16/2007 )
Very Easy.....
make sure your HDD works with the Xbox Frist
http://xboxdrives.x-pec.com/?p=list&v_brand=&v_modelnum=&v_size=&v_rpm=&v_buffersize=&v_locking=&v_version=&v_postedby=
if your going to start off with a Bigger HDD and not use stock HDD then this is just for you
Stuff you will need
1.-(AR) ActionReplay
-8mb memory card
Or Home Made AR with AR software
2. 007 Agent Under Fire or MechAssault or splinter cell (can NOT be Platinum Versions)
3. xboxhdm 1.9 http://www.smdepot.net/zzk/Exploits/xboxhdm_v1.9.zip
4. Torx 10 And Torx 20 Screwdrivers - To Open XBOX
5. A Spare/Blank Hardrive (Can be anything from 10 GB to 500 GB with (Krayzie Ndure or Krayzie UXE)
6. FTP Program (FlashFXP. AceFTP, SmartFTP etc.)
7. Krayzie Ndure or Krayzie UXE installer
8. A blank CD-R/W, DVD-R/W
9.CD/DVD Burner
Ok now you have what you need first thing you do is get your eeprom.bin from the Xbox
thats where the Krayzie UXE Or Krayzie ndure installer comes in
Load Krayzie UXE installer Or Krayzie Ndure on to (AR) 8Mb card then copy to Xbox HDD
load the Game you are Useing and load save
Now Backup eeprom when done you'll need to Set up FTP by going to Settings
For DHCP it is easy just set DHCp and save for Static its a little harder
use this Tut for static http://www.smdepot.net/forum/index.php?topic=7.0
*note* if you do not see ip in bottom right Conner just do a "Soft-reboot" by Holding down
L+R+start+back
ok now you have FTP access
username: xbox
password: xbox
url/ip : 192.168.x.xxx <---somethen like that
Port: 21
soon as you are connected, copy C: And E: to PC HDD Now you are Done with the Xbox for Now Shut down Xbox.
Now you need to Make your XboxHDm CD extracted xboxhdm_v1.9.zip to Pc desktop
now Open xboxhdm folder in there you will see
linux folder put C: and E: in the linux Dir
put eeprom.bin in the eeprom Dir, (Note) eeprom.bin can be found in /E/backup/
now Click on make-iso-win.bat to make the Iso this will take some time
Now just Burn Iso on a CD-R/W or DVD-R/W
Set New HDD To Cable Select put in PC On Master cable
(note Master cable should be on one of your CD drives if you
use only one cd drive set Cd drive on Slave cable and HDD on Master cable)
boot Pc and Go to Biso you can do this by pressing Del'key or F1
Make sure HDD is set on Primary Master Cable and set it to User Not Auto
now save and exit
Load XboxHDm CD that you made
you will see a list of options
pick option 1
alot of words and numbers will go By then you'll come to a New screen
Type xboxhd hit Enter
Now pick option 1 (Build HDD )
this will take some time just keep typeing yes
format F: yes so on so on
when done reboot by typing reboot or poweroff
now load Xboxhdm cd agin this time pick
option 3
type lockhd -a
only takes like 10secs now shut down PC and take HDD out
you'll Need to Open Xbox with the Torx 10 And Torx 20 Screwdrivers
and put New Xbox HDD in and trun on the Xbox And you're Done,
To install Softmod on New HDD just use this Tut. http://www.smdepot.net/forum/index.php?topic=19.0
w00t220:
very nice tut as usual zzk
Selayan:
Deos this have to be done on the same pc that you have the xdhm and all the other files which you downloaded? Or can you make the cd on one pc, then have the hard drive installed in another pc and just load the cd at start up and do the rest? Offcourse, following that you go in bios and set it to what you said?
jebus989:
Think about it, whichever pc you use isnt going to have xboxhdm on the harddisk so this won't matter. One disk any pc.
Also good to see people using the chatrrom and the forums :D
[edit] any pc that can boot from CD-ROM at least (using this method)
Selayan:
That's cool, I'm going to first see if the pc that the hard drive I want to use is fuctional. We have not used it in 3 years so no one minds that I take the hard drive out. Later on I'll add it to the xbox.
Navigation
[0] Message Index
[#] Next page