How to flash a BIOS onto a Xenium ICE chip

[kingyiff]

Flashing the BIOS onto a Xenium ICE
This is a very easy process if you know what you are doing, which is what I am going to explain here.

BEWARE: IF DONE INCORRECTLY THIS CAN FRY OR SEVERELY DAMAGE YOUR CHIP!!!

To use the tutorial here correctly you must have this all done first:
1. Your chip is fully installed
2. The USB is in one of the controller ports on the front of the xbox
3. You can see the Xenium ICE Operating System when you turn your xbox on

Now that you have that all done; you are ready to flash the bios.

Step 1: You must first obtain a Removable Thumb Drive (Hard Drive) it can be any size; just big enough to hold at most 1mb.

Step 2: After you have the thumb drive you will need to get the correct bios for your version xbox. Find out what version xbox you have and the go get the right bios from the usual places or visit the chat and look for drfweega.

Step 3: After you have the bios unzip or unrar it and then transfer just the ??.bin file to the thumb drive.

Step 4: Place the thumb drive in the front of your xbox and load up the xbox

Step 5: Click on Launch Menu -> Add a New Item -> Flash -> H:\ -> (whatever).BIN

Step 6: Then choose the color you want and then it should flash perfectly fine and then you should be able to launch it and see the original dash

Step 7: Just install the dash and you should have a perfectly modded xbox! J

Hope all went well

Photos will be up soon but now ... the doctor must now sleeeeeeep

[Boost]

can you put the flash bios file on a xbox memory card some how and use a controller?

sweet tut

BOOST

[kingyiff]

I never really thought about that boost ...

but it seems possible if you could tell it to flash from the mem card because it makes the mem card the H: drive ... so good point

but the chip comes with a USB controller adapter