Title: Swapping XboX HDD, Need help!!! Post by: kristian on August 02, 2010, 08:08:39 AM I found a really cheap SATA HDD 500 GB, did anyone attempt to use SATA on 1st xbox with the sata to ide convertor??? Is it even possible.
Title: Re: Swapping XboX HDD, Need help!!! Post by: realg123 on August 03, 2010, 11:37:12 AM It is possible. But 500GB PATA's are less work and are very common. Why not just use Pata instead?
To answer your question. The hard drive must be lockable. To find out if it is. Go to the site below and enter your hard drive model #. And if it states "yes" under looking then it will work. http://xboxdrives.x-pec.com/?p=list Title: Re: Swapping XboX HDD, Need help!!! Post by: kristian on August 03, 2010, 12:57:43 PM PATA, IDE Same Thing ? Right? I just found that PATA(IDE) are much more expensive then SATA. That's why I posted my question. Just trying to save some money that is all ;D
Title: Re: Swapping XboX HDD, Need help!!! Post by: realg123 on August 03, 2010, 01:05:40 PM Yes pata/ide same thing. They are more expensive I dont know why :(
Well either way you buy the sata drive + the adapter it may come to the same thing. You might as well buy a bigger Sata drive. Anyway let me know how it goes Title: Re: Swapping XboX HDD, Need help!!! Post by: kristian on August 03, 2010, 01:27:41 PM One more thing does buffer size matter or anything else?
HDD SPECS: Drive Type: Internal Capacity: 500GB Interface: Serial ATA-300 Interface Type: SATA Spindle Speed (RPM): 7200 Buffer Memory: 16MB Average Seek (msec): 12.6 Average Latency (msec): 4.16 Maximum External Transfer Rate (Mbits/sec): 300 Form Factor: 3.5" Logical Cylinders/Heads/Sectors per Track: 16,383/16/63 Bytes Per Sector: 512 Nonrecoverable Read Errors per Bits Read: 1 in 10E14 Title: Re: Swapping XboX HDD, Need help!!! Post by: realg123 on August 03, 2010, 06:31:58 PM sorry i wouldnt be able to tell you i dont know. it should be okay
but sata ftp transfer speeds may be a bit slower Title: Re: Swapping XboX HDD, Need help!!! Post by: kristian on August 04, 2010, 07:26:08 AM No Problem. Thank you for the response. I will give it a shot and keep you posted on what happened ;)
|